6
INSTALLATION
VENUS COMFORT 2032 / 2032 E
Step 1 – Installing the flush valve and connecting the water supply
1) Shut off the water supply.
2) Cut an adequate opening in the wall for
the dimensions of the box and the sleeve (not
supplied).
3) Insert the electronic flush valve’s box through
the opening.
4) Connect the flush valve inlet to the water
supply.
5) Connect the flush valve outlet nipple to the pipe
leading to the W.C.’s inlet.
6) Turn on the water supply. Make sure there is no
water leakage.
7) Assemble the mud guard cover to protect the flush valve.
Step 2 – Connecting the power source
1) Once the electricity, plumbing and the tile
works are completed, cut the mud guard cover
wherever required by the installation.
2) Assemble the plastic seat for the permanent
cover plate using the four screws provided.
3) If your model is operated by transformer, place
the transformer cable near the electricity plug
and thread the transformer’s wire to the box.
4) Connect the electronic unit connector that
leads to the solenoid valve to the solenoid
connector.
Note: the MIN and MAX marks on the box
