11
INSTALLATION
8)
To prevent the sensor from entering into adjusting mode, do not step or put your
hand within the sensor range for 5 seconds after the connection of the power supply.
9) To operate, step within the sensor range for a minimum of 8 seconds. Move
away and the flush valve will flush a few seconds after your departure.
10) If needed adjust the flow rate by turning the regulating valve.
11) If the range is unsatisfactory, refer to the section entitled “Settings
Adjustment”.
6) Connect the electronic unit connector that leads to the power source to the
battery back up device connector.
Connect the other connector coming from the battery back up device to the
transformer connector.
4) Assemble the panel to the cover seat and tighten it
with the bottom screw.
5) Remove the protective sticker covering the sensor
.
7) Before inserting the six 1.5V batteries to the battery back up device, plug in
the transformer. Now, insert the batteries into the battery back up device box.
VENUS COMFORT 2032 PE
