13
SETTINGS ADJUSTMENT
Adjusting the sensor range with the remote control
In order to adjust the sensor with a Remote Control you should hold the Remote
Control straight in front of the sensor in a distance of about 6-8” (15-20cm).
Choose the function you want to adjust by pressing once on one of the function
buttons. After pressing once on a specific function button, a quick flashing of
the red light in front of the sensor will occur.
At this stage, you can change the adjustment by pressing the (-) or (+) buttons, every
push will increase or decrease one level. After finishing the adjustment, turn on the
water supply.
TEMPORARY OFF FUNCTION
DELAY IN TIME
DETECTION RANGE
DELAY OUT TIME
R E S E T
FULL FLOW TIME
