8
INSTALLATION
VENUS COMFORT 2032 P
Step 1 – Installing the flush valve and connecting the water supply
1) Shut off the water supply.
2) Cut an adequate opening in the wall for the dimensions of
the box and the sleeve (not supplied).
3) Insert the electronic flush valve’s box through the opening.
4) Connect the flush valve inlet to the water supply.
5) Connect the flush valve outlet nipple to the pipe leading to
the W.C.’s inlet.
6) Turn on the water supply. Make sure there is no water
leakage.
7) Assemble the mud guard cover to protect the flush valve.
1) Once the electricity, plumbing and tiles works are finished,
replace the temporary protective cover with the plastic seat.
Adjust it using the four screws provided.
2) Assemble the plastic seat for the permanent cover plate
using the four screws provided.
3) Now, connect the connectors going out from the
electronic unit:
a. Connect the blue cable connector to the blue
cable connector coming out from the piezo button.
b. Connect the electronic unit connector that
leads to the solenoid valve to the solenoid valve
connector.
c. Connect the electronic unit connector that leads
to the power source to the battery box connector.
Note: the MIN and MAX marks on the box
Step 2 – Connecting the power source
