9
INSTALLATION
VENUS COMFORT 2032 P
7)
To prevent the sensor from entering into adjusting mode, do not step or put your
hand within the sensor range for 5 seconds after the connection of the power supply.
8) To operate, step within the sensor range for
a minimum of 8 seconds. Move away and the
flush valve will flush a few seconds after your
departure.
9) If needed adjust the flow rate by turning the
regulating valve.
10) If the range is unsatisfactory, refer to the
section entitled “Settings Adjustment”.
11) Tighten the panel to the cover seat with the
bottom screw.
4) Insert the battery into the battery box.
6) Remove the protective sticker covering the sensor and
move away from the sensor range
.
5) Assemble the panel to the cover seat. Do not tighten
the bottom screw yet.
