Sterling SHR150, Руководство пользователя

Страница: 13 / 17

ZP-MEC3-BX-01A
SHR 150/200 Manual
RD: MAY, 2004
RL:1
KH
11
MAINTENANCE
The efficiency of the heater can be impaired if it
gets dirty. If the heaters are installed in areas
where considerable dust is present in the air,
periodic burner cleaning may be necessary. Dust
may be entrained in the primary air supply and
deposited on the back side of the ceramic. This
can be very easily removed by dusting the
ceramic face and the air inlet with a blast of low
pressure air, a maximum of 20 psi. Occasionally pilots or the burners refuse to function properly
after a summer shutdown. The burner passage-
ways can be cleaned out by using a flexible brush
(bottle brush) It is common for spider webs or
cocoons to be found present in these areas.)
Preventative maintenance is the best policy.
Heaters should be cleaned once a heating
season
REPLACEMENT PARTS DIAGRAM–
Reference next page