manualshive.com logo in svg

Stemin IS 6, Руководство пользователя, Страница: 4 / 29

Поделиться
Скачать
Stemin IS 6 Скачать руководство пользователя страница 4

STEMIN GmbH

Audio - Video - Control Engineering
82 549 Koenigsdorf - GERMANY

Vorab IS6_BDA_V1_01_eng.doc

Copyright 

©

 STEMIN GmbH 2007

Seite 4 von 29

1. Safety and Enviroment

1.1 Safety

1. 

Do not spill any liquids on the equipment and do not drop any objects through the
ventilation slots in the equipment.

2.   The equipment may be used in dry rooms only.
3. 

The equipment may be opened, serviced, and repaired by authorized personnel
only. The equipment contains no user-serviceable parts.

4. 

Before connecting the equipment to power, check that the AC mains voltage stated
on the provided power supply is identical to the AC mains voltage available where
you will use the equipment.

5.

Operate the equipment with the provided power supply IS6PS1 only. Using power
supplies with an AC output and/or a different output voltage may cause serious
damage to the unit.

6. 

If any solid object or liquid penetrates into the equipment, shut down the sound
system immediately. Disconnect the power cable from the power outlet immedia-
tely and have the equipment checked by our customer service.

7. 

If you will not use the equipment for a long period of time, disconnect the power
cable from the power outlet. Please note that the equipment will not be fully isola-
ted from power when you set the power switch to OFF.

8. 

Do not place the equipment near heat sources such as radiators, heating ducts, or
amplifiers, etc. and do not expose it to direct sunlight, excessive dust, moisture,
rain, mechanical vibrations, or shock.

9. 

To avoid hum or interference, route all audio lines, particularly those connected to
the microphone inputs, away from power lines of any type. If you use cable ducts,
be sure to use separate ducts for the audio lines.

10. Clean the equipment with a moistened (not wet) cloth only. Be sure to disconnect

the power cable from the power outlet before cleaning the equipment! Never use
caustic or scouring cleaners or cleaning agents containing alcohol or solvents since
these may damage the enamel and plastic parts.

11. Be careful not to bend the pins of the plug when plugging in the connecting cables.

Don’t use force (danger of short-circuit!)

1.2 Enviroment

1. 

The IS6PS1 power supply will draw a small amount of current even when it’s
switched off. To save energy, disconnect the power cable from the power outlet if
you will leave the equipment unused for a long period of time.

2. 

When scrapping the equipment, separate the case, circuit boards, and cables, and
dispose all components in accordance with local waste disposal rules.

.

Содержание IS 6






























Отзывы:

Нет отзывов