manualshive.com logo in svg

Stemin IS 6, Руководство пользователя, Страница: 12 / 29

Поделиться
Скачать
Stemin IS 6 Скачать руководство пользователя страница 12

STEMIN GmbH

Audio - Video - Control Engineering
82 549 Koenigsdorf - GERMANY

Vorab IS6_BDA_V1_01_eng.doc

Copyright 

©

 STEMIN GmbH 2007

Seite 12 von 29

B – CHANNEL PRESELECTION – PUSH-BUTTONS

With the preselection – push-buttons it is possible to choose a channel by your-
self if the B-Channel modus is activated. For indication a yellow LED lights up in
respective push-utton. The channel is shown in the display. The active channel
is also shown at the central unit via a LED.
Depending on the configuration of the conference terminals, it is eather possible
to deactivate the channel selection (Standard) or to only switch between the
channels.

BUSY – INDICATOR

The red busy – LED’s are indicating the already active channels.

2.5.2 Backside

On the backside of the conference terminal are the connections from the central unit
respectively the connections to other conference terminals in the same booth.
In addition a connection for an optional control key with LED is available.

2.5.3 Sideview

HEADPHONE - JACK

If headphones are connected to the 3.5mm jack, the integrated speakers of the confe-
rence terminal mute automatically. Because there is no possibility of feedback when
headphones are connected, the headphone-signal is not muted when the own mic-
rophone is turned on.

MICROPHONE-JACK  

If a microphone of a headset is connected to the 3.5mm jack, the integrated microphone
mutes and the LED light indication ring of the microphone wents out. In addition the y-
ellow LED of the headset-detection lights up.

Содержание IS 6






























Отзывы:

Нет отзывов