STEMCELL RoboSep 20000, Техническое руководство

Страница: 18 / 36

THIS PRODUCT IS MANUFACTURED AND CONTROLLED UNDER A QUALITY MANAGEMENT SYSTEM CERTIFIED TO ISO 13485 MEDICAL DEVICE STANDARDS.
FOR RESEARCH USE ONLY. NOT INTENDED FOR HUMAN OR ANIMAL DIAGNOSTIC OR THERAPEUTIC USES.
TOLL FREE PHONE 1 800 667 0322
y
PHONE +1 604 877 0713 VERSION 2.4.0
INFO@STEMCELL.COM
y
TECHSUPPORT@STEMCELL.COM
y
FOR GLOBAL CONTACT DETAILS VISIT WWW.STEMCELL.COM DOCUMENT #28940
13
2.4 REPORT FILES
Two types of usage data are automatically saved during RoboSep™ operation: Run Reports and Log Files. Run Reports contain
details of each run as entered by the operator, while Log Files contain more detailed information about instrument operation.
2.4.1 End of Run Report Files
Information such as the operator ID, protocol name, run time, reagent lot
numbers and usage volume, sample ID and volume is presented in an End of
Run Report. To benefit fully from the End of Run Report, the lot number, sample
ID and user ID information should be entered during experiment set-up (see
Section 2.2.5).
2.4.2 Log Files
Log files are used by authorized STEMCELL Technologies personnel to assist
with troubleshooting and diagnostics.
2.4.3 Accessing Report Files
The “Run Log” page, under the Instrument Tasks tab, lists diagnostic and run
information. The End of Run Report and Log Files are accessed via the buttons at the bottom of the page (Figure 21). Selecting the
green “Reports” button brings up a folder containing all of the reports that have been generated to date. These are organized into
subfolders by year and month. The Report file name is in the format “Report_DDMMMYYYY_HH_MM_SS.html”. The folder contains all
the run reports in chronological order.
Selecting the “Logs” button brings up a folder containing all of the log files created for your instrument. One file is created each time
RoboSep™ is initialized. The file names have the format robosep.log.XXX, where “XXX” is “txt” for the most recent file and “XXX” =
1, 2, 3… for increasingly older files.
To access the Report and Log files remotely, set up a connection between RoboSep™ and an external computer as explained in
Section 4 – Communications and File Transfer.
Figure 21 – The Run Log page, shown below, is used to access
reports and log files.