STEMCELL RoboSep 20000 Скачать руководство пользователя страница 32 | Manualshive

Страница: 32 / 36

STEMCELL RoboSep 20000 Скачать руководство пользователя страница 32

Copyright © 2013 by STEMCELL Technologies Inc. All rights reserved including graphics and images. STEMCELL Technologies & Design, STEMCELL Shield Design, Scientists Helping

Scientists, EasySep, and RoboSep are trademarks of STEMCELL Technologies Inc.

THIS PRODUCT IS MANUFACTURED AND CONTROLLED UNDER A QUALITY MANAGEMENT SYSTEM CERTIFIED TO ISO 13485 MEDICAL DEVICE STANDARDS.

FOR RESEARCH USE ONLY. NOT INTENDED FOR HUMAN OR ANIMAL DIAGNOSTIC OR THERAPEUTIC USES.

TOLL FREE PHONE

1 800 667 0322

y

PHONE

+1 604 877 0713

VERSION 2.4.0

[email protected]

y

[email protected]

y

FOR GLOBAL CONTACT DETAILS VISIT WWW.STEMCELL.COM

DOCUMENT #28940

27

8

ROBOSEP™ SPARE PARTS AND ACCESSORIES

PRODUCT NAME

CATALOG #

RoboSep™

Service Rack

20101

Hydraulic Fluid Bottle and Tubing

20102

RoboSep™

Buffer (250 mL)

20104

5X RoboSep™

Buffer (250 mL)

20124

EasySep™

RBC Lysis Buffer 10X Concentrate (100 mL)

20120

RoboSep™

Filter Tip Racks (1 box of 8 racks)

20125

RoboSep™

Tip Head Polishing Compound (7 mL)

20119

Ethernet Cross-over Cable

20106

RoboSep™

Carousel

20107

“The Big Easy” EasySep™

Magnet

18001

RoboSep™ Barcode Scanner

20501

9

WARRANTY

The following is an overview of the warranty and service options available for RoboSep™. For answers to any maintenance or warranty
questions, please contact STEMCELL Technical Support (contact information is available in Section 10).

WARRANTY PLAN

COVERAGE

COVERAGE DETAILS

CATALOG #

RoboSep™ Limited Warranty

1

1 Year

2

• Parts
• Labor

20200

RoboSep™ Limited Warranty with
Preventative Maintenance Package

1 Year

2

•  Parts
•  Labor
•  Preventive Maintenance

3

20202

Preventative Maintenance Package

1 Year

2

• Preventive Maintenance

20203

1

Included in purchase of RoboSep™.

2

Maximum purchase of up to 5 consecutive years.

3

Preventative Maintenance includes: Full calibration check, touchscreen verification, tip head verification, tip stripping verification,

hard-ware verification, soft-ware verification and/or upgrades, robot homing verification, fluidic system verification, electrical card and
connector verification, pump and drive verification, fastener and tubing verification, belt and motor verification, bearing and gear
verification, verification certificate, related shipping costs (if applicable).

«
...
30
31
32
33
34
...
»

Содержание RoboSep 20000





































Отзывы:

Нет отзывов