Steca TK RW-2, Инструкция по установке и эксплуатации

Страница: 19 / 28

19
735.800 | 10.7
EN
8.3.6 Diagram legend
;1.6: Texts for diagram legend (1 characters)
diagram_t1_text = "T1"
diagram_t_text = "T"
diagram_t3_text = "T3"
diagram_t4_text = "T4"
diagram_t5_text = "T5"
diagram_t6_text = "T6"
Names can be defined for the temperature sensors for the legend in the
temperature diagram. The texts for the temperature sensors are each
restricted to a maximum of 1 characters.
The legend texts diagram_t1_text...diagram_t6_text are set in the fac-
tory to "T1"..."T6".
The names are defined by changing the characters within the quotation
marks, e.g. diagram_t1_text = "Collector"
8.3.7 Units for output/energy
;1.7: Units in system image ("kw" or "btu")
system_units = "kw"
The physical units for output and energy can be converted from metric
units to those units commonly used in North America.
In the factory, system_units is set to "kw", i.e. the units are shown in W
or Wh.
If system_units is set to "btu", the units are shown in Btu/h or Btu.
The unit prefixes, e.g. "k" (kilo), "M" (Mega) etc. are given automatically.
8.3.8 WLAN after turning on the IFA router
;.1: Disable wireless LAN after power on (yes: 1 / no: 0)
wlan_disabled = 0
Wlan_disabled is preset to 0, so the wireless LAN is automatically ena-
bled after restarting the IFA router.
If wlan_disabled is set to 1, the wireless LAN of the IFA router is inactive
after restarting.
8.3.9 Wireless LAN name
;.: Wireless LAN name
ssid = "TK RW1 Net"
The ssid is preset to "TK RW Net", so the wireless network of
the IFA router appears on the picture frame under the name
"TK RW Net". A change of name requires a new assignment of the net-
work in the digital picture frame.
NOTE
The name must always be given in quotation marks, e.g. "My solar
energy system".