Steca TK RW-2, Инструкция по установке и эксплуатации

Страница: 23 / 28

3
735.800 | 10.7
EN
10 Appendix: Adding your own
images to a slideshow
You can add your own pictures to those in the remote display. They are
then displayed alternatingly in the slideshow.
10.1 Requirements to your own pictures
only images in the JPEG format can be used. The suffix for each of
the images must be "jpg".
The size of the picture frame is 800 x 450 pixels. Deviations from
the image size can lead to loss of quality!
The picture sizes should not exceed 100 kB, otherwise it may lead to
longer loading times.
The names 1_system.jpg and _diagram.jpg are in use by the
remote display and cannot be chosen for your own images, other-
wise they will be overwritten.
10.2 Procedure for inserting your own images
The IFA router and digital picture frame must be disconnected from
the mains.
Remove the USB flash drive from the IFA router and plug it into the
USB port of a PC.
Copy your own images into the "share/images" folder.
Attention: The only supported format is JPEG!
Remove the USB flash drive from the USB port of your PC and plug
it into the IFA router.
Connect the IFA router to the mains and wait until it is ready for
operation.
Connect the digital picture frame to the mains and make any neces-
sary setting changes.
•
•
•
•
•
•
•
•
•
•