Steca TK RW-2, Инструкция по установке и эксплуатации

Страница: 20 / 28

0
735.800 | 10.7
EN
8.3.10 Wireless LAN channel
;.3: Wireless LAN channel (value between 1 and 11)
channel = 6
The factory preset value for channel is set to 6. The value can be changed
between 1 and 11.
8.3.11 Wireless LAN encryption
By default, the IFA router is supplied without wireless LAN encryption
because no security-relevant information is being transmitted. If desired,
the network can be encrypted with WEP, WPA or WPA.
To do this, the configuration file "Config.wri" on the USB flash drive
needs to be modified (see section 8.1 "Appendix: configuration file").
The settings for the wireless LAN encryption are made in "Config.wri",
under "Wireless LAN encryption". If a wireless LAN encryption is selected,
a password of your choice must be set under "Wireless LAN password".
This password is required for access authorisation for the digital picture
frame.
NOTE
Config.wri may only be opened with Microsoft
®
WordPad!
;.4: WLAN encryption ("OPEN", "WEP", "WPA", "WPA")
encryption = "OPEN"
Factory preset value for encryption is "OPEN", so the network is not
encrypted.
If the network is to be encrypted, you must set
encryption = "WEP" for WEP encryption,
encryption = "WPA" for WPA encryption,
encryption = "WPA" for WPA encryption.
8.3.12 Wireless LAN password
;.5: Wireless LAN password (OPEN: "", WEP: 5 or 13 characters,
WPA / WPA: 8 to 63 characters)
passphrase = ""
The factory preset value for the password is " " because the network is
unencrypted by default.
If you chose WEP encryption, the password must be entered as a 5-digit
or 13-digit password, for example
password = "1345"
If you chose WPA or WPA encryption, the password must be entered as
an 8 to 63-digit password, for example
password = "1345678"
NOTE
Only use numbers and letters for the password. A distinction is made
between uppercase and lowercase letters.
•
•
•