Steca TK RW-2, Инструкция по установке и эксплуатации

Страница: 13 / 28

13
735.800 | 10.7
EN
Diagram title: A diagram title can be defined which is displayed
above the temperature diagram. The required title is written into the
line with a maximum of 50 characters, and stored with "save".
Select inputs for diagram: Additional temperature sensors can only
be shown in the temperature diagram by setting the control check-
mark, and not in the system image. If no sensor has been selected,
the standard setting is used, i.e. the solar energy system sensors are
shown.
Additionally, individual names can be defined for the temperature
sensors and shown in the legend. The required designation is writ-
ten into the appropriate line with a maximum of 1 characters, and
stored with "save".
Web form: The time between two image changes during the slide-
show can be set using "Images refresh rate".
TS Analyzer Files: The measured values of the controller which are
stored on the server can be downloaded as a ZIP file by pressing
"Download". In order to limit the data load of the file, the individual
download is restricted to one month.
7 Using a digital picture frame: initial
commissioning
The IFA router can also send the graphics via the integrated WLAN inter-
face to a WLAN-capable digital picture frame.
7.1 Commissioning for the first time
When starting the digital picture frame for the first time, please see the
Kodak EasyShare W80 user's guide "Getting started".
7.2 Language selection
See the user's guide for the Kodak EasyShare W80 "Getting started",
setting the language. Once the language has been selected, the digital
picture frame will start looking for wireless networks.
7.3 Wireless network
All available wireless networks will be displayed.
Select the network "TK RW Net" and press "OK".
7.4 Safety check
The system performs a safety check. The picture frame indicates that the
network is not secured since the delivery status of the remote display is
without any preset encryption.
There is no factory preset encryption because no security-relevant infor-
mation is being transmitted. The message box is closed by selecting
"Finish". If you want to encrypt image data, see section 8.3.11, "Wireless
LAN encryption".
