15
735.800 | 10.7
EN
8
Changing the WLAN settings
If another wireless network is run within range of the IFA router, it may
be necessary to change the channel or the network name of the WLAN
network in order to prevent faults occurring. In addition, the encryption
of the WLAN network can be adjusted as required.
To do this, the configuration file "Config.wri" on the USB flash drive
needs to be modified (see section 8.1 "Appendix: configuration file").
NOTE
Config.wri may only be opened with Microsoft® WordPad!
Please note that after changes have been made to the WLAN settings,
the network settings of the picture frame need to be re-adjusted.
8.1
Appendix: configuration file
The "Config.wri" configuration file on the USB flash drive contains all
settings which can be changed by the end customer.
The file "Config.wri" is located in the directory: Share -> Config.
The "Config.wri" file must be opened with Microsoft
®
WordPad in order
to edit it.
8.2
How to edit the configuration file
The IFA router and digital picture frame have to be disconnected
from the mains.
Remove the USB flash drive from the IFA router and plug it into the
USB port of a PC.
Open the Config.wri file with Microsoft
®
WordPad, edit it and save
with the same name.
Remove the USB flash drive from the USB port of your PC and plug
it into the IFA router.
Connect the IFA router to the mains and wait until it is ready for
operation.
Connect the digital picture frame to the mains and make any neces-
sary changes to the settings (see section 7, "Using a digital picture
frame: initial commissioning").
NOTE
Config.wri may only be opened with Microsoft
®
WordPad!
The USB flash drive may not be formatted!
Содержание TK RW-2
Страница 27: ...27 735 800 10 27 EN 14 Notes ...
Страница 28: ...735800 ...
