Photographie programmée (6/7)
EN
FR
ES
12
Affichage du panneau
de commande
(retardateur activé)
En
En
Timed Photography (6/7)
Show Panel Display (Timer Active)
Flashes while timer is active
When that did not open the
shutter: shots:
Time remaining
until next shot
While shutter is open:
Time remain-
ing until shutter closes
Number of shots remaining
Flashes while shutter is open
The Speaker and Release Lamp
The following illustration shows when a beep will soud( )and the release lamp flash ( ) with a delay
of 5 s, an esposure time of 4 s,and an interval of 5 s.
Loudspeakers
Light green
The red indicator light
Focus output
The release of output
8
1 12 3
16 7
1
2
0 1 2 3 4 5 6 7 9 0 1 1 1 415 1 18 9 20 1 22 23 24 25 26 27
1
4. End Shooting
Shooting will end automatically when the se-
lected number of shots has been taken. To end
shooting before all photographs have been
taken, press the
TIMER START/STOP
button ( 5 ).
Partsof the
(2/3)
SRC-ALBA
12
Display Panel*
Functional cursor
Show time
Lock indicator
Low battery indicator
“
TIMER ACTIVE”
indicator
Speaker on/off indicator
“
SET
”indicator
“
RELEASE
” indicator
Number of shots
*The illustration inside the front cover shows
the control panel with all elements lit. In the
other illustrations throughout this manual,
elements relevant to the explanation in the
accompanying text are shown in black. Indi-
cators not mentioned in the text are shown
in gray.
1
2
3
4
5
6
7
8
9
5
Inserting Batteries
Slide the battery-chamber cover ( 10 ) from the
back of the SRC-ALBA and insert two AAA 1.5V
LR03 alkaline batteries (available separately)
as shown.
The Low Battery Indicator ( )
The low battery indicator ( ) will blink when the
batteries are low. Please replace the battery
4
Replacing Batteries
When replacing batteries:
1 Check that the “
TIMER ACTIVE
” ( ) and “
RE-
LEASE
” ( )indicators are not displayed.
2 Turn the camera off and disconnect the SRC-
ALBA.
3 Remove the batteries.
4 Wait until the control panel has gone out and
insert new batteries.
5
8
When the
Is Not in Use
The
is not equipped with an off switch.
To reduce the drain on the batteries when theSRC-
ALBA is not in use; end shooting and check that
the “
TIMER ACTIVE
” ( ), “
SET
” ( ),and
“
RELEASE
” ( ) indicators are not
displayed.
The drain on the batteries increases when these
indicators are flashing.
SRC-ALBA
SRC-ALBA
5
7
8
Clignote lorsque
le retardateur est activé
Lorsque cela n’a pas ouvert l’obturateur :
(entre deux vues) temps restant jusqu’à la
prochaine prise de vue
Lorsque l’obturateur est ouvert : temps
restant jusqu’à la fermeture de l’obturateur
Nombre de prises restantes
Clignote lorsque l’obturateur est ouvert
Haut-parleur et voyant de déclenchement
L’illustration suivante indique quand le bip se fait entendre ( ) et quand le voyant de déclenchement
clignote ( ) pour un retardement de 5 s, un temps d’exposition de 4 s et un intervalle de 5 s.
En
En
Timed Photography (6/7)
Show Panel Display (Timer Active)
Flashes while timer is active
When that did not open the
shutter: shots:
Time remaining
until next shot
While shutter is open:
Time remain-
ing until shutter closes
Number of shots remaining
Flashes while shutter is open
The Speaker and Release Lamp
The following illustration shows when a beep will soud( )and the release lamp flash ( ) with a delay
of 5 s, an esposure time of 4 s,and an interval of 5 s.
Loudspeakers
Light green
The red indicator light
Focus output
The release of output
8
1 12 3
16 7
1
2
0 1 2 3 4 5 6 7 9 0 1 1 1 415 1 18 9 20 1 22 23 24 25 26 27
1
4. End Shooting
Shooting will end automatically when the se-
lected number of shots has been taken. To end
shooting before all photographs have been
taken, press the
TIMER START/STOP
button ( 5 ).
Partsof the
(2/3)
SRC-ALBA
12
Display Panel*
Functional cursor
Show time
Lock indicator
Low battery indicator
“
TIMER ACTIVE”
indicator
Speaker on/off indicator
“
SET
”indicator
“
RELEASE
” indicator
Number of shots
*The illustration inside the front cover shows
the control panel with all elements lit. In the
other illustrations throughout this manual,
elements relevant to the explanation in the
accompanying text are shown in black. Indi-
cators not mentioned in the text are shown
in gray.
1
2
3
4
5
6
7
8
9
5
Inserting Batteries
Slide the battery-chamber cover ( 10 ) from the
back of the SRC-ALBA and insert two AAA 1.5V
LR03 alkaline batteries (available separately)
as shown.
The Low Battery Indicator ( )
The low battery indicator ( ) will blink when the
batteries are low. Please replace the battery
4
Replacing Batteries
When replacing batteries:
1 Check that the “
TIMER ACTIVE
” ( ) and “
RE-
LEASE
” ( )indicators are not displayed.
2 Turn the camera off and disconnect the SRC-
ALBA.
3 Remove the batteries.
4 Wait until the control panel has gone out and
insert new batteries.
5
8
When the
Is Not in Use
The
is not equipped with an off switch.
To reduce the drain on the batteries when theSRC-
ALBA is not in use; end shooting and check that
the “
TIMER ACTIVE
” ( ), “
SET
” ( ),and
“
RELEASE
” ( ) indicators are not
displayed.
The drain on the batteries increases when these
indicators are flashing.
SRC-ALBA
SRC-ALBA
5
7
8
Haut-parleurs
Vert clair
Voyant rouge
Sortie de mise au point
Déclenchement de sortie
4. Arrêt de la prise de vue
La prise de vue s’arrête automatiquement lorsque
le nombre de prises sélectionné a été atteint. Pour
arrêter la prise de vue avant que toutes photos
aient été prises, appuyez sur le bouton TIMER
START/STOP (
5
).
