Setting the Timer
To ensure correct operation, choose an interval at
least one second longer than the exposure time.
When using autofocus, set the delay to two seconds
or more and choose an interval at least two seconds
longer than the exposure time to ensure that the
camera has time to focus. When using long expo-
sure noise reduction (available with some digital
cameras), the interval should be at least twice the
exposure time.
Intervals of 00:00:00 will automatically be reset to
00:00:01 when the SET button (
6
) is pressed to put
settings into effect.
To set the number of shots to--(unlimited), select 1
and press the arrow button (
8
) down or select 399
and press the arrow button up.
2.3. After adjusting all settings as desired, press the
SET button (
6
) to put the new settings into effect.
Timer will issue a beep- (speakers in the open cir-
cumstances ), and the SET indicator will go out.
En
En
Connecting the SRC-ALBA
Parts of the
(3/3)
SRC-ALBA
6
11
The “TIMER ACTIVE” “SET”and “RELEASE”Indicators
lf this flashes Expression means: Close method
TIMER ACTIVE
SET
RELEASE
(TIMER
ACTIVE not
flashing)
Timer active (page11); press
TIM-
ER START/STOP
button ( 5 ).
Settings can be modified (page 7);
press
SET
button ( 6 )
Manual release active (page 14);
release shutter-release button
( 9 ; if button is in
HOLE
position,
release shutter- release lock).
Lighting/Lock Button
Press the lighting /lock button ( 7 ) briefly to
activate the control panel backlight. The back-
light will remain lit for about six seconds; press-
ing the arrow button ( 8 ) while the backlight is
on extends the timer for another six seconds.
To lock all controls except the shutter-re
lease ( 9 ) and Lighting/lock buttons, press
the illuminator lock button until the lock icon
( ) is displayed in the control panel. To release
the lock, Please press the lighting/lock buton untill
the lock icon is no longer displayed.
L
DELAY LONG INTVL N
TIMER ACTIVE SET RELEASE
DELAY LONG INTVL N
SET
DELAY LONG INTVL N
SET
DELAY LONG INTVL N
SET
Disconnecting the MC-36b
Setting the Timer
After checking that the “
TIMER ACTIVE
” ( ) and ‘
RE-
LEASE
” ( ) indicators are not displayed, turn the
camera off and disconnect the SRC-ALBA . Replace
the Remote cord socket terminal cover.
5
8
Timed Photography (5/7)
To ensure correct operation, choose an interval at
least one second longer than the exposure time.
When using autofocus, set the delay to two sec-
onds or more and choose an interval at least two
seconds longer than the exposure time to ensure
that the camera has time to focus. When using
long exposure noise reduction (available with
some digital cameras ),the interval should be at
least twice the exposure time.
Intervals of 00:00:00 will automatically be re
set to 00:00:01 when the
SET
button ( 6 )is pressed
to put settings into effect.
To set the number of shots to--(unlimited),
select
1
and press the arrow button ( 8 ) down or
select
399
and press the arrow button up.
2.3
After adjusting all settings as desired, press
the
SET
button ( 6 )to put the new settings into
effect timer will issue a beep- (speakers in the open
circumstances ),and the “
SET
”indicator will go out.
The new settings will remain in effect until
changed or until the batteries are removed
or exhausted.
3.Start the Timer
Press the
TIMER START/STOP
button ( 5 ).The
timer will start and “
TIMER
ACTIVE
" ( )
will flash
in the show panel. Between shots the control panel
will show the time remaining until the next photograph
is taken. Two second Focus output, focus and the
release of light-green light.
5
While the shutter is open,the show panel will
show the time remaining until the shutter closes,
and the release lamp and “
RELEASE
” indicator
( ) will flash at one-second intervals.FocusNand
the release indicator Lianghong Deng. If the
speaker is turned on ,the timer will be issued one
second intervals for the beeps, each take a picture,
the remaining number of shots will be updated.
8
1
Turn the camera off.
2
Check that the “
TIMER ACTIVE”
( ) and “
RE-
LEASE
” ( ) indicators are not diaplayed.
3
Remove the remote cord socket termial cover
from the camera. By connecting the camera
shutter, and will shutter plug ( 1 ) . The camera
firmly connected.
5
8
The new settings will remain in effect until changed or
until the batteries are removed or exhausted.
3. Start the Timer
Press the TIMER START/STOP button (
5
). The timer
will start and TIMER ACTIVE (
9
) will flash in the
show panel. Between shots the control panel will
show the time remaining until the next photogra-
phy is taken. There will be two-second focus and the
focus and release light-green indicator will be lit.
While the shutter is on, the LCD will show the time
remaining before the shutter closes, and RELEASE
indicator (
8
) will flash at one-second intervals. The
focus and release indicator is lit and stays red. If the
speaker is turned on , the timer will issue « beep » at
an interval of one second, the remaining number of
shots will be updated after every picture is taken.
11
Timed Photography (5/7)
EN
FR
ES
