Star Headlight & Lantern LCS790 Скачать руководство пользователя страница 5

Страница: 5 / 56

-2-

Installation Information

Precautions

Proper installation of the unit is essential for years of safe, reliable operation.
Please read all instruction

before

installing the unit. Failure to follow these

instructions can cause serious damage to the unit or vehicle and may void
warranties.

•

Installing any siren requires a good understanding of automotive
electronics, systems, and procedures.

•

Please read all of the instructions, before attempting to install or
operate any of the sirens.

•

Always disconnect power when installing or uninstalling this device.

•

Never use a battery charger to bench test this device.

•

This product is intended to be installed and operated in interior
applications only.

Keep These Instructions

- Keep these instructions in the vehicle or other

safe place for future reference. Advise the
vehicle operator of the location.

Unpacking

- Inspect contents for shipping damage. If found, alert carrier

immediately.

Contents

Contents should include:

1 - Siren with Microphone
1 - Mounting Bracket w/Screws
1 - Microphone Bracket w/Screws
2 - Wiring Connectors
1 - Pack of Button Labels
1 - Installation and Operating Instructions

Contact your supplier immediately if any components are missing.

Содержание LCS790

























































Результаты поиска

Содержание LCS790

Отзывы:

Бренды по названию

Популярные бренды

Star Headlight & Lantern LCS790, Инструкция по установке и эксплуатации

Результаты поиска

Содержание LCS790

Отзывы:

Бренды по названию

Популярные бренды