Stanley STGS9100, Оригинальное руководство пользователя, Страница: 10 / 40

ENGLISH
(Original instructions)
10
Cleaning
WARNING! Dust and grit from metal grinding often
accumulate on interior surfaces and could create an
electrical shock hazard if not cleaned out. Use only
mild soap and a damp cloth to clean the tool. Never
let any liquid get inside the tool; never immerse any
part of the tool into a liquid.
WARNING! Never use solvents or harsh chemicals
to clean non-metal parts of the tool. These
chemicals may weaken the material of the parts.
Use only mild soap and damp cloth to clean the
tool. Never let any liquid get inside the tool; never
immerse any part of the tool into liquid.
WARNING! Do not overload your angle grinder.
Overloading causes a reduction in speed and
efficiency, causing your angle grinder to become too
hot. If this happens, operate your angle grinder
under no load for one or two minutes until it has
cooled to normal operating temperature. Switching
your angle grinder off under load will reduce the life
of the switch.
IMPORTANT! To ensure product SAFETY and
RELIABILITY, repairs, maintenance and adjustment
(other than those listed in this manual) should be
performed by authorized service centers or other
qualified organizations, always using identical
replacement parts. Unit contains no user service
able parts inside.
ACCESSORIES
WARNING! Since accessories, other than those
offered by STANLEY, have not been tested with this
product, use of such accessories with this tool could
be hazardous. To reduce the risk of injury, only
STANLEY, recommended accessories should be
used with this product.
The performance of any power tool is dependent upon the
accessory used. STANLEY accessories are engineered to
high quality standards and are designed to enhance the
performance of power tool. By using STANLEY accessories
will ensure that you get the very best from your STANLEY tool.
STANLEY offers a large selection of accessories available at
our local dealer or authorized service center at extra cost.
PROTECTING THE ENVIRONMENT
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your STANLEY product needs
replacement, or if it is of no further use to you, do not dispose
of it with household waste. Make this product available for
separate collection.
STANLEY provides a facility for the collection and
recycling of STANLEY products once they have
reached the end of their working life. To take
advantage of this service please return your product
to any authorised repair agent who will collect them
on our behalf.
You can check the location of your nearest authorised repair
agent by contacting your local STANLEY office at the address
indicated in this manual. Alternatively, a list of authorised
STANLEY repair agents and full details of our after-sales
service and contacts are available on the Internet at:
www.2helpU.com.
NOTES
STANLEY’s policy is one of continuous improvement to our
products and as such, we reserve the right to change product
specifications without prior notice. Standard equipment and
accessories may vary by country. Product specifications may
differ by country.
Complete product range may not be available in all countries.
Contact your local STANLEY dealers for range availability
SERVICE INFORMATION
STANLEY offers a full network of company-owned and
authorized service locations. All STANLEY Service Centers
are staffed with trained personnel to provide customers with
efficient and reliable power tool service. For more information
about our authorized service centers and if you need technical
advice, repair, or genuine factory replacement parts, contact
the STANLEY location nearest you.
TECHNICAL DATA
SMALL ANGLE GRINDER
STGS9100 STGS9115 STGS9125
Voltage V 220-240 220-240 220-240
Frequency Hz 50-60 50-60 50-60
Input power W 900 900 900
No-load speed min
-1
11000 11000 11000
Wheel diameter mm 100 115 125
Spindle diameter M10 M14 M14
Max disc thickness
Grinding discs mm 6 6 6
Weight kg 2.1 2.2 2.3