Stanley Access Technologies
65 Scott Swamp Road
Farmington, CT 06032
Document # 204144 REV B • www.stanleyaccess.com • 1.800.7.ACCESS
If the door:
HITS THE CLOSE STOP
too hard
Set
Close Check Length
to 50. Set
Close Press
to 1 and test.
Increase the
Close Brake
setting until there is good braking.
Increase or decrease
Close Check
until there is smooth motion enter-
ing and in
Close Check
.
STALLS
during opening without any
mechanical reason. . .
Continues to stall and it seems
to happen at the transition
from
Open Brake
to
Open Check
Increase
Obstruction Time
from .5 seconds to 1.0 seconds
Make small increases to
Open Brake
.
STALLS
during closing without any
obvious reason. . .
Continues to stall and it seems to
happen at the transition to Close
Check
Increase
Obstruction Time
Increase
Close Check
one count at a time
SPEEDS UP
during Close Check
C
lose Check Speed
is set too high. Reduce
Close Check
one count at a
time until door motion is suitable.
Attachment 7
Fine Tuning Slide Doors
(Sheet 2 of 2)
Tuning the Stanley Automatic Door
(Continued).
Match your actual door to one from the list of doors described in the attachment. Start by installing these
settings. Use the guide below to make adjustments to these settings.
