iQ Control Box
14 Document # 204144 REV B • www.stanleyaccess.com • 1.800.7.ACCESS
Cop
yr
ight 2019, S
tanley Ac
cess T
echnologies, LL
C.
All rights r
es
er
ved. R
epr
oduction
in whole or in p
ar
t without the expr
ess wr
itt
en permission o
f S
tanley is pr
ohibit
ed.
01.25.2019
Index
Min
Value
Max
Value
Description
Defaults
Single
Dual
36
1
60
Open Check
Obstruction
Time
Open Check Obstruction Time is the amount of time
in increments of 0.025s the door applies force when
almost stopped or stopped when the controller
indicates a state of “04”.
Before increasing this parameter, check mechanical
issues, and speed and torque parameter settings.
50
50
37
1
99
Open Check
Torque
Open Check Torque is the torque used during
normal operation in open check state.
This torque must be set to comply with ANSI/BHMA
door force requirements.
This parameter sets the maximum current available
to the motor which is directly proportional to the
door force. This torque setting is used in
conjunction with open check speed.
40
40
39
1
99* Open Learn
Speed
Open Learn Speed is the speed used on power up,
during FIS, after an obstruction, and return from
breakout. The controller display may indicate either
02 or 04 as a door state and still use Open Learn
Speed based on the conditions listed prior.
This speed is typically set higher then check speed,
to allow faster door motion when not in the check
zones, but still slower door motion than normal
operation.
This parameter sets the target speed setting.
Other parameters like open learn torque, and open
acceleration as well as door properties like friction,
door length, and door weight affect door speed.
25
25
40
1
99
Open Learn
Torque
Open Learn Torque is the torque used on power up,
during FIS, after an obstruction, and return from
breakout.
This torque must be set to comply with ANSI/BHMA
door force requirements.
This parameter sets the maximum current available
to the motor which is directly proportional to the
door force. This torque setting is used in
conjunction with open learn speed.
48
25
41
1
60
Open
Obstruction
Time
Open Obstruction Time is the amount of time in
increments of 0.025s the door applies force when
almost stopped or stopped when the controller
indicates a state of “02”.
Before increasing this parameter, check mechanical
issues, and speed and torque parameter settings.
50
50
Table 3. Settings (continued)
Table 3 Settings continued next page.
