204038
Rev. B, 4/12/08
© 2008, THE STANLEY WORKS. ALL RIGHTS RESERVED.
5 of 17
3.2
Installing the Header Components
NOTE
Table 3-2 shows the list of header components.
Table 3-2. Header Components
Part Name
Manufacturer
Part Number
Terminal Block Assembly
Stanley Access Technologies
516913
Buzzer and Bracket Assembly
Stanley Access Technologies
415109
4-Contact Plate Assembly
Stanley Access Technologies
516908
DE-MC521 Controller
Stanley Access Technologies
516928
3.2.1
Refer to Figure 2, and, using the nuts, clips, and screws provided, INSTALL the
following (typical) components on the track inside the header:
•
DE-MC521 Controller: Replace the existing MC521 with DE-MC521 (P/N
516928)
•
Terminal block assembly
•
Buzzer and bracket assembly
3.2.2
SECURE all wire harnesses with cable ties.
3.3
Installing the Components on the Header Cover or Jamb
3.3.1
INSTALL power key switch assembly as follows:
•
If installation is a Dura-Glide 3000, Refer to 203926, “Rotary/Key Switch
Instruction Manual,” for machining template and MOUNT power key switch
assembly P/N 415119 to header cover.
•
If installation is a Dura-Glide 2000, Refer to 203926,“Rotary/Key Switch
Instruction Manual,” for machining template and MOUNT power key switch
assembly P/N 415119 to header or jamb inside of building.
Figure 2. Typical Layout for Components in the Header
HEADER
MOTOR GEAR
BOX
POWER
SUPPLY
PULLEY
SOLENOID
LOCK
BUZZER
ASSY.
DE-MC521
CONTROLLER
TERMINAL
BLOCK ASSY.
