manualshive.com logo in svg

Stanley 07536, Инструкция по эксплуатации и обслуживанию


Поделиться
Скачать
background image

  

This instruction manual must be read by any person installing or operating this tool with particular attention to the 

following safety rules.

  

Always wear impact-resistant eye protection during operation of the tool. The grade of protection required should 

be assessed for each use.

  

Use hearing protection in accordance with employer’s instructions and as required by occupational health and 

safety regulations.

 

 Use of the tool can expose the operator’s hands to hazards, including crushing, impacts, cuts and abrasions and 

heat. Wear suitable gloves to protect hands.

1.  SAFETY DEFINITIONS

The definitions below describe the level of severity for each signal word. Please read the manual and pay attention to these 

symbols.

 

DANGER:

 Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

 

WARNING:

 Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

 

CAUTION

: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

 

CAUTION:

 Used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may 

result in property damage.

Improper operation or maintenance of this product could result in serious injury and property damage. Read and 

understand all warnings and operating instructions before using this equipment. When using power tools, basic safety 

precautions must always be followed to reduce the risk of personal injury.

SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE

1.1  GENERAL SAFETY RULES

• 

For multiple hazards, read and understand the safety instructions before installing, operating, repairing, maintaining, 

changing accessories on, or working near the tool. Failure to do so can result in serious bodily injury.

• 

Only qualified and trained operators must install, adjust or use the tool.

• 

DO NOT use outside the design intent of placing STANLEY Engineered Fastening Blind Rivets.

• 

Use only parts, fasteners, and accessories recommended by the manufacturer.

• 

DO NOT modify the tool. Modifications can reduce the effectiveness of safety measures and increase the risks to the 

operator. Any modification to the tool undertaken by the customer will be the customer’s entire responsibility and void 

any applicable warranties.

• 

Do not discard the safety instructions; give them to the operator.

• 

Do not use the tool if it has been damaged.

• 

Prior to use, check for misalignment or binding of moving parts, breakage of parts, and any other condition that affects 

the tool’s operation. If damaged, have the tool serviced before using. Remove any adjusting key or wrench before use.

• 

Tools shall be inspected periodically to verify that the ratings and markings required by this part of ISO 11148 are 

legibly marked on the tool. The employer/user shall contact the manufacturer to obtain replacement marking labels 

when necessary.

• 

The tool must be maintained in a safe working condition at all times and examined at regular intervals for damage 

and function by trained personnel. Any dismantling procedure will be undertaken only by trained personnel. Do not 

dismantle this tool without prior reference to the maintenance instructions.

1.2  PROJECTILE HAZARDS

• 

Disconnect the tool from the air supply before performing any maintenance, attempting to adjust, fit or remove a nose 

assembly or accessories.

• 

Be aware that failure of the workpiece or accessories, or even of the inserted tool itself can generate high-velocity 

projectiles.

• 

Always wear impact-resistant eye protection during operation of the tool. The grade of protection required should be 

assessed for each use.

• 

The risks to others should also be assessed at this time.

• 

Ensure that the workpiece is securely fixed.

• 

Check that the means of protection from ejection of fastener and/or mandrel is in place and is operative. 

• 

Warn against the possible forcible ejection of mandrels from the front of the tool.

• 

DO NOT operate a tool that is directed towards any person(s).

4

ENGLISH 

ORIGINAL INSTRUC TION

Содержание 07536





















































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 07536

Mafell F80 Fitting Instructions Manual preview
F80
Бренд: Mafell Страницы: 46
U-Line H-491 Quick Start Manual preview
H-491
Бренд: U-Line Страницы: 6
Parkside 301845 Translation Of The Original Instructions preview
301845
Бренд: Parkside Страницы: 99
Stanford Research Systems PS355 Operation And Service Manual preview
PS355
Бренд: Stanford Research Systems Страницы: 42
e+p C 1002 Instruction Manual preview
C 1002
Бренд: e+p Страницы: 2
OCZ OCZGXS850 Manual preview
OCZGXS850
Бренд: OCZ Страницы: 8
Microtec SHT-20LP1 Manual preview
SHT-20LP1
Бренд: Microtec Страницы: 6
Worldwide Cyclone 360 Manual preview
Cyclone 360
Бренд: Worldwide Страницы: 2
Far Tools RDP601 Manual preview
RDP601
Бренд: Far Tools Страницы: 17
Narex EBD 30-8 Original Operating Manual preview
EBD 30-8
Бренд: Narex Страницы: 40
SKF 1077600 Instructions For Use Manual preview
1077600
Бренд: SKF Страницы: 52
Valex Painting machine Instruction Manual And Safety Instructions preview
Painting machine
Бренд: Valex Страницы: 20
Xantrex XPower Powerpack 300 Owner'S Manual preview
XPower Powerpack 300
Бренд: Xantrex Страницы: 60
Gardebruk Deuba MZUK001 Instructions Manual preview
Deuba MZUK001
Бренд: Gardebruk Страницы: 34
W&T GT-86121-1224-W2E Manual preview
GT-86121-1224-W2E
Бренд: W&T Страницы: 14
V-TAC VT-2002 Instruction Manual preview
VT-2002
Бренд: V-TAC Страницы: 13
Parkside PAR 12 A1 Original Instructions Manual preview
PAR 12 A1
Бренд: Parkside Страницы: 65
ERBA 33632 Instruction Manual preview
33632
Бренд: ERBA Страницы: 75

Бренды по названию

Популярные бренды

Загрузить еще бренды