manualshive.com logo in svg

Stanley 07536, Инструкция по эксплуатации и обслуживанию


Поделиться
Скачать
background image

©2021 Stanley Black & Decker inc.

All rights reserved.

The information provided may not be reproduced and/or made public in any way and through any means (electronically or 

mechanically) without prior explicit and written permission from STANLEY Engineered Fastening. The information provided 

is based on the data known at the moment of the introduction of this product. STANLEY Engineered Fastening pursues a 

policy of continuous product improvement and therefore the products may be subject to change. The information provided 

is applicable to the product as delivered by STANLEY Engineered Fastening. Therefore, STANLEY Engineered Fastening 

cannot be held liable for any damage resulting from deviations from the original specifications of the product.

The information available has been composed with the utmost care. However, STANLEY Engineered Fastening will not 

accept any liability with respect to any faults in the information nor for the consequences thereof. STANLEY Engineered 

Fastening will not accept any liability for damage resulting from activities carried out by third parties. The working names, 

trade names, registered trademarks, etc. used by STANLEY Engineered Fastening should not be considered as being free, 

pursuant to the legislation with respect to the protection of trade marks.

1.  SAFETY DEFINITIONS ................................................................................................................................................... 4

1.1  GENERAL SAFETY RULES .......................................................................................................................................................................... 4

1.2  PROJECTILE HAZARDS .............................................................................................................................................................................. 4

1.3  OPERATING HAZARDS ............................................................................................................................................................................... 5

1.4  REPETITIVE MOTIONS HAZARDS............................................................................................................................................................ 5

1.5  ACCESSORY HAZARDS .............................................................................................................................................................................. 5

1.6  WORKPLACE HAZARDS ............................................................................................................................................................................. 5

1.7  NOISE HAZARDS .......................................................................................................................................................................................... 5

1.8  VIBRATION HAZARDS................................................................................................................................................................................. 5

1.9  ADDITIONAL SAFETY INSTRUCTIONS FOR PNUEMATIC AND HYDRAULIC TOOL ................................................................ 6

2. SPECIFICATIONS ............................................................................................................................................................ 7

2.1  SPECIFICATION FOR 07536 TOOL .......................................................................................................................................................... 7

2.2  SPECIFICATION FOR 07531 INTENSIFIER ............................................................................................................................................. 7

3.  INTENT OF USE .............................................................................................................................................................. 8

3.1  TOOL DIMENSIONS - 07536 MODEL ..................................................................................................................................................... 8

4.  PUTTING INTO SERVICE ................................................................................................................................................ 9

4.1  AIR SUPPLY .................................................................................................................................................................................................... 9

4.2  AIR CURSORS ..............................................................................................................................................................................................10

4.3  LOADING AND RELOADING THE TOOL ..............................................................................................................................................10

4.4  OPERATING PROCEDURE ........................................................................................................................................................................12

5.  SERVICING THE TOOL..................................................................................................................................................13

5.1  PNEUMATIC CONTROL BOX ...................................................................................................................................................................13

5.2 DAILY .............................................................................................................................................................................................................13

5.3 WEEKLY .........................................................................................................................................................................................................13

5.4  MOLY LITHIUM GREASE EP 3753 SAFETY DATA..............................................................................................................................13

5.5  SERVICE KIT ..................................................................................................................................................................................................14

5.6  AIR CURSOR TOOL, INTENSIFIER & CONTROL BOX ASSEMBLY 07536-02100 ......................................................................15

6. MAINTENANCE ............................................................................................................................................................16

6.1  DISMANTLING 07536-02200 .................................................................................................................................................................16

6.2  GENERAL ASSEMBLY OF BASE TOOL 07536-02200 .......................................................................................................................18

6.3  PARTS LIST FOR BASE TOOL 07536-02200 .......................................................................................................................................19

6.4  DISMANTLING INSTRUCTIONS .............................................................................................................................................................20

6.5  PROTECTING THE ENVIRONMENT .......................................................................................................................................................21

6.6  INTENSIFIER 07531-02200 ......................................................................................................................................................................21

7. PRIMING ......................................................................................................................................................................23

7.1  OIL DETAILS .................................................................................................................................................................................................23

7.2  HYSPIN® VG32 AND AWS 32 OIL SAFETY DATA ..............................................................................................................................23

7.3  PRIMING PROCEDURE..............................................................................................................................................................................23

8.  FAULT DIAGNOSIS .......................................................................................................................................................24
9.  EC DECLARATION OF CONFORMITY ..........................................................................................................................26
10.  UK DECLARATION OF CONFORMITY .........................................................................................................................27
11.  PROTECT YOUR INVESTMENT! ...................................................................................................................................28

3

ORIGINAL  INSTRUC TION  

ENGLISH

Содержание 07536





















































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 07536

G&D VisionXS-IP-F-DP-UHR Additional Instructions For Installation And Operation preview
VisionXS-IP-F-DP-UHR
Бренд: G&D Страницы: 148
Parkside PSSA 18 A1 Instruction Manual preview
PSSA 18 A1
Бренд: Parkside Страницы: 64
Parkside PHKSA 18-Li B2 Operation Manual preview
PHKSA 18-Li B2
Бренд: Parkside Страницы: 44
Parkside PSFS 250 A1 Original Instructions Manual preview
PSFS 250 A1
Бренд: Parkside Страницы: 64
P.I.T. Professional GSH65-C5 Operation Manual preview
Professional GSH65-C5
Бренд: P.I.T. Страницы: 20
ISC 4345260 Operating Instructions Manual preview
4345260
Бренд: ISC Страницы: 38
Ryobi PBLRC25 Operator'S Manual preview
PBLRC25
Бренд: Ryobi Страницы: 20
Earlex HG 1600K Operating Instructions preview
HG 1600K
Бренд: Earlex Страницы: 5
RAMSET SDP 1 Operator'S Manual And Maintenance Instructions preview
SDP 1
Бренд: RAMSET Страницы: 12
norbar PNEUTORQUE PTM series Operator'S Manual preview
PNEUTORQUE PTM series
Бренд: norbar Страницы: 26
Parkside PHZ 3 A1 Operating Instructions Manual preview
PHZ 3 A1
Бренд: Parkside Страницы: 75
Agilent Technologies 6116A Service Manual preview
6116A
Бренд: Agilent Technologies Страницы: 47
Desoutter MC51-10 Technical Manual preview
MC51-10
Бренд: Desoutter Страницы: 8
Corsair TX-M Series Manual preview
TX-M Series
Бренд: Corsair Страницы: 10
TDK-Lambda SWS-L Series Manual preview
SWS-L Series
Бренд: TDK-Lambda Страницы: 20
Yokota TKA-150-C Manual preview
TKA-150-C
Бренд: Yokota Страницы: 8
ITech IT7600 Series Programming Manual preview
IT7600 Series
Бренд: ITech Страницы: 103
Rivtec RT-C2 Operator'S Manual preview
RT-C2
Бренд: Rivtec Страницы: 4

Бренды по названию

Популярные бренды

Загрузить еще бренды