manualshive.com logo in svg

Standard Horizon CP390i, Руководство пользователя


Поделиться
Скачать
background image

Page 4

CP390i and CPF390i

WARNING!!!

Electronic charts displayed by the GPS Chart Plotter are believed to be accurate and
reliable, but are not intended to be a substitute for the official charts, which should
remain your main reference for all matters related to the execution of safe
navigation.
For this reason you should always keep the official published and approved nautical
charts on board.

     FCC Compliance Statement

This device complies with Part 15 of the FCC limits for Class A digital devices. This
equipment generates, uses and can radiate radio frequency energy and, if not
installed or used in accordance with the instructions may cause harmful interference
with radio communications.
There is no guarantee that interference will not occur in a particular instance. If this
equipment does cause harmful interference to other equipment, try to correct the
problem by relocating the equipment.

Consult an authorized STANDARD HORIZON dealer or other qualified service
technician if the problem cannot be corrected. Operation is subject to the following
conditions: (1) This device cannot cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause
undesired operation.

Copyright 2011. VERTEX STANDARD CO., LTD. All rights reserved. Printed in Italy.

No portion of this manual may be reproduced without the permission of VERTEX STANDARD CO., LTD.

OM CODE: 

S4x2SH8wc_0ww  16.50aD80  - 210111

Содержание CP390i









































































































































































Отзывы:

Нет отзывов

Похожие инструкции для CP390i

Бренды по названию

Популярные бренды

Загрузить еще бренды