Stairmaster Crossrobics 1650 LE, Руководство пользователя

Страница: 62 / 108

Page 53
PARTS REMOVAL AND REPLACEMENT
them. To install the middle seam fasteners (see Figure 13), reach
inside from the front right below the pedal arms and support the seam
while installing the bottom three fasteners. Next, reach in from the
left side to support the covers while installing the top two fasteners.
6. Install the left side cover, then the seat tray and seat.
7. The front face of the right front cover goes in front of the right pedal
arm stop (see Figure 15).
Weight Stack Covers
1. Remove the fasteners securing the weight stack covers to the frame
(remove the top middle fastener last) and take off the covers. The
fasteners are located around the perimeter of the covers, 11 on each
side. For some maintenance, it may be necessary to expose the
outside of the weight stack; the inside weight stack cover will rarely
need to be removed.
2. Reinstalling the weight stack covers requires that you perform the
same procedures for removing these covers—only in reverse.