Stack ST8302, Руководство пользователя

Страница: 47 / 81

STACK ST8302 and ST8360 Video-Logger System Chapter 3. Configuration
User Guide 41
Hold down the DEC button on the Video Controller and press INC to
start calibrating the gears (see p. 34).
Enter the wheel speed for first gear at 5,000 RPM and then press NEXT.
Now press DEC on the Video Controller to calibrate the next gear or if
you have calibrated all the gears for your vehicle press INC to save the
values and exit the gear menu. The system will store values for up to
seven gears.
If you are unable to achieve 5,000 RPM in a gear, you should
determine the wheel speed at a lower engine speed and scale
upwards. For example, you could use the wheel speed at 1,000
RPM and then multiply by 5 to calculate the correct wheel speed
at 5,000 RPM.
Acceleration Limit
This setting only applies to the ‘Max’ version as it relates to the
Performance Meter. The Acceleration Limit setting specifies the
maximum allowable acceleration in units of G. This is to reduce the
impact of wheel-spin on the Predicted Lap Time. At the default setting
of 10.0 G it will have no effect.
For road based cars a typical Acceleration Limit would be 1.0 G.
Setting the value to 10.0 G disables it.
EDIT SCALE
Accel Limit 10.0 G