Chapter 2. Getting Started
STACK ST8302 and ST8360 Video-Logger System
12
User Guide
Connecting the ST8302 Standalone System
1.
Connect each of the
sensors
to the appropriate cable in the
sensor
wiring harness
, as shown in Table 1 above.
2.
Connect a
12v DC power supply
to the
power input cable
.
3.
Connect the VS Module to the video system using the
video harness
, as
described in Table 3 above.
If you do not have the correct connectors for your video recorder,
camera or microphones, adapters can be purchased from your local
electrical supplier.
Components of the ST8360 Expansion system
The Expansion system comprises:
•
The
V module
video interface
•
A
Stack Display device
(such as the ST8100 Display system shown
in the diagram) receiving input from various sensors attached to it by
a wiring harness
•
A
CANBus
cable with a 4-way connector which connects the
V
module
to the existing harness on the
Stack Display device
•
A
video camera, microphone and recorder
set-up (not included
as part of the system)
•
A
video wiring harness
with a 15-way connector, which carries the
data from the V module for overlay onto the video display (see Table
3)
Содержание ST8302
Страница 1: ...Part No Issue No ST542075 001 ST8302 and ST8360 Video Logger System Users Guide...
Страница 2: ......
