Element-P
40
Figure 25
The “Grate Weldment” and the “Shaker Plate” may need to be removed for cleaning
purposes during the Daily or Periodic Maintenance if the holes become plugged. This
allows a closer inspection of the holes in the pot. Use a 3/16” drill bit to clean out the
holes if needed.
2. Once a day pull the Ash Shaker Rod
(See figure 25)
several times back and forth to
shake the ashes down into the Ash Pan. Failure to regularly shake the ashes down will
cause the stove to start burning dirty.
3. Check ash pan
(See Figure 25)
to determine emptying frequency needed. NOTE: Do
not use a vacuum cleaner for this purpose. Hot coals may cause your vacuum filter to
catch fire. Place ashes in a metal container with a tight fitting lid. The closed container of
ashes should be placed on a noncombustible floor or on the ground, well away from all
combustible materials, pending final disposal. If the ashes are disposed of by burial in
soil or otherwise locally dispersed, they should be retained in the closed container for at
least two days until all cinders have thoroughly cooled.
4. Once or twice daily pull the Heat Exchange Tube Scraper,
(See Figure 25)
out and
back in to clean heat exchange tubes. Failure to operate the tube scraper daily may result
Содержание Element-P
