Element-P
34
St Croix SmartScan Maintenance
System
-
“Pre-emptive Monitoring”
is an innovative
way of detecting when the unit is burning incorrectly.
The following situations can affect the way a Pellet Stove burns:
Operator Error, Poor
Fuel Quality, a Plugged Venting System, a Plugged Stove, a Dirty Burn Pot, Worn
Door Gaskets, Worn Glass Gaskets or Weak Combustion Fan.
How does it work?
-
The area monitored is
inside the Firebox/Burnpot
area, directly
above the back edge of the burn pot.
The SmartScan Infra Red sensing system is very accurate. The monitoring takes place
from a remote location; it can sense an object as small as
one pellet
and does not depend
on sensing temperatures. Temperature sensing is difficult at this location, because it
monitors an area that fluctuates between extremely hot temperatures during High Burn
and lower temperatures in the pot during Low Burn.
By monitoring this area, the stove will shut down when conditions in the Burn Pot fall
outside of the Normal Operating range. Shutting the unit down when fuel reaches this
level, will trigger a diagnostic code that notifies the operator that the stove needs
maintenance. The above list is intended as a guide to determine where the problem may
be.
Figure 22
Содержание Element-P
