Element-P
42
Figure 26
4.
Heat Exchange Baffle.
Remove the baffle and clean the ashes that accumulate on
a regular basis. Once a month or sooner, depending on the quality of fuel being used
(See Figure 26)
To remove the baffle
(See Figure 26)
, lift the back of the baffle up to clear the inner back
of the stove and slide towards the front of the stove. The baffle will slide out of the
keyhole slots and drop down.
When putting the baffle back in the stove, make sure the
tabs are in the keyhole slots and the back of the baffle is lifted up over the inner back.
Clean the baffle on a regular basis. Frequency of cleaning depends on amount of fuel
being burnt and the quality of the fuel. Fuel with low ash content is recommended.
Failure to clean the baffle can cause the Element-P Stove to become plugged with fly
ash.
Содержание Element-P
