Element-P
30
Pre-Lighting Instructions
WARNING: - Risk of Fire.
- Do not operate with the Firebox door or Ash Removal doors open
- Do not store Fuel or other Combustible material within marked Installation
Clearances.
- Inspect and Clean Flues and Chimneys regularly.
DANGER - Risk of Fire or Explosion
-Do not burn Garbage, Gasoline, Drain Oil or other Flammable Liquids.
WARNING - The auger can start at any time while the Element-P is running
REMEMBER: Read the manual before lighting the unit.
The Control Board has 4 separate programs. Programs are specific to the style of Burn
Pot System in the stove. Before lighting the Stove for the first time, be sure the correct
program is chosen.
To change the program on the board, the Stove must be off and the unit must be cold. The
programs are identical in operation, except for the Cycle Time. The Cycle time is the
total of the ON Time & OFF Time added together. The ON Times are constant, so this
means that the OFF Time is increased or decreased, depending on the program chosen.
1 -
Program 1.
The Cycle Time is 11.5 seconds. THIS PROGRAM IS ONLY TO BE
USED WITH THE ELEMENT-MF MODEL.
(DO NOT USE THIS PROGRAM
WITH THE ELEMENT-P).
2 -
Program 2.
The Cycle Time is 13 seconds. THIS PROGRAM IS ONLY TO BE
USED WITH THE ELEMENT-MF MODEL.
(DO NOT USE THIS PROGRAM
WITH THE ELEMENT-P).
3 -
Program 3.
The Cycle Time is 11.5 seconds.
THIS PROGRAM IS THE DEFAULT
PROGRAM FOR USE WITH THE ELEMENT-P.
This program is for use with
Pellets, Cherry Pits and a 50/50 Percent Mixture of Pellets and Corn
(See fig. 21
on page 31). (DO NOT USE THIS PROGRAM WITH THE ELEMENT-MF).
4 -
Program 4.
The Cycle Time is 10 seconds.
This Program offers Self-Ignition and is
only for units that have the Versa Grate system & Igniter installed
. This program is
for use with
Cherry Pits.
(See fig. 21 on page 31). (DO NOT USE THIS
PROGRAM WITH THE ELEMENT-MF).
If the
incorrect
program is chosen for a specific fuel, the burnpot will overload. Use
caution when using this feature.
The default program to use for the Element-P is
Program 3
. Program 4 is for Cherry Pits and in some instances may be used to “Tweak”
the unit for certain qualities of fuel and installation conditions.
(Ask Dealer before using
program 4 for any other fuel than Cherry Pits.)
Содержание Element-P
