________________________________________________________________________________________________________________________________________________________________________________________________________________________
8
Product Manual Type:
637f
07-02-10-01-E-V0304.doc
Safety precautions
Attention !
The digital servo drives are in the sense of EN 50178/VDE 0160 power
electronic equipments for regulating the flow of energy in electrical power
installations. They are exclusively for supplying SSD Drives (or SSD Drives
approved) servo motors. Handling, installation, operation, and maintenance are
only permitted under the conditions of and in keeping with the effective and/or
legal regulations, regulation publications and this technical document
The operator must make sure that these regulations are strictly followed.
Concept of the galvanic separation and insulation:
Galvanically separation and insulation correspond to EN 50178/VDE 0160,
amplified insulation.
In addition
all digital signal inputs and outputs are galvanically separated either
as a relay or via opto coupler. In this way an increased interference security and
the limitation of damages in case of external incorrect connections is given.
The voltage level must not exceed the low safety voltage 60V DC or 25V AC,
respectively in accordance with EN 50178/VDE 0160.
The operator must make sure that these regulations are strictly followed.
Danger !
High contact voltage !
Danger of getting shocked !
Danger to your life !
Caution !
Opening the servo drive by the operator is prohibited due to reasons of
safety and guarantee. The requirement for problem-free operation of the
servo drive is the expert configuring !
