________________________________________________________________________________________________________________________________________________________________________________________________________________________
28
Product Manual Type:
637f
07-02-10-01-E-V0304.doc
Connector assignment and functions
2.4
Feedback Sensor Connection X30
The Feedback system generates a digital value, representing the rotor position
Derivated from this value:
commutation according to
pole pair number
actual speed value
position value for position control
2.4.1
Function module X300
The connector X30 is directly related to the function module X300. This plug-in module
(
see
chapter 1.4.3.1) determines the type of usable Feedback system.
Thus the 637f drive system gets flexibility and is adaptable to future requirements.
Types X300:
X300_RD2: standard Resolver
X300_HF2: option HIPERFACE
®
Further types on request
Plug and Play
The 637f identifies the type of the module X300.
The EASYRIDER
®
Windows – Software loads the correct function code.
You follow the instructions in the EASYRIDER
®
Windows – Software.
At function module RD2 the function code is already installed (factory default).
Hint:
With application of the function module X300_HF2 (HIPERFACE
®
) please observe
documentation 07-02-09-02-E-V0002.
