33
LOAD DEFAULT:
Selecting this option restores all the settings to the original factory settings.
REBOOT:
Use this function to restart the device.
POWER OFF:
Use this function to turn off the device.
AUTO MAINTAIN:
When “AUTO MAINTAIN” is on, users can set a specific time for the
DVR to restart. The system will restart automatically according to the parameter(s) chosen.
5.2.7 Information
Click “System Settings,” then click “System,” and
select “Information” to enter the “System Info”
menu. The information included accessible through
this interface includes: the device type, the software
version, the release date, import parameters, and
export parameters. It is necessary to export
parameter to a USB drive before importing any
parameter from the USB drive; otherwise, it will not
be possible to successfully import the parameter.
5.3 Record
Move the cursor over the “RECORD” tab (the
icon will be highlighted when selected). Press
“Enter” to enter the “Record” settings
interface. The direction keys and cursor can
be used to change the settings.
5.3.1 Record Channel
After clicking the “Channel” tab, users can
modify the settings of the camera connected to the selected channel. Alternatively, users can
make the same change (or set of changes) to the settings of all of the cameras at once. To apply
the change(s) to all available channels, first select “
All
” from the “Channel” field by pressing
the arrow buttons; the options include CH1, CH2, CH3, CH4 and ALL. Then make the desired
changes and save them before exiting the menu.
5.3.2 Record
“
ENABLE” indicates that the channel is enabled for recording.
5.3.3 Recording Bit-rate
There are three options: “GOOD,” “NORMAL,” and “LOW,” corresponding to “HIGHEST,”
“HIGH,” and “NORMAL” data stream standards, respectively. The recording bit rate of each
channel can be adjusted independently.
Содержание PKDIG
Страница 1: ......
