12
3.3.2 NTSC/PAL Conversion
Press the PAIR button on the rear of the receiver and not release preponderate over 10 seconds. The TV
or monitor screen will sho
w “PAL or NTSC “
,
receiver at PAL mode time, press the PAIR button on the
rear of the
transmitted
and not release preponderate over 10 seconds,
The TV or monitor screen will
show “60HZ “,
receiver at NTSC mode time,
The TV or monitor screen will show “50HZ “otherwise
he
shall give birth to
flicker
on the TV or monitor screen.
Note: 1)
When you use a set the wireless camera and wireless DVR which has a pairing ID code, if you
turn on the wireless camera and wireless DVR, then off, and it will automatically start to link between the
wireless camera and wireless DVR. If it has been paired, and then you will be able to watch the video on
the TV or monitor screen. If it has not been paired and also not find the pairing object, it will show “no
signal” on the TV or monitor screen.
2)
Because the use of the environment, here may be interference
from many wireless devices, so when you find equipment not working properly, please turn the wireless
camera and DVR on once again.
3.3.3 Application Wiring Diagram
Note1:
In order to get better reception results, keep the distance between the transmitter and receiver in
at least 3 meters and the distance between the transmitter and the transmitter must be at least
maintained in 5 meters.
Please refer to the above application wiring diagram.
Note 2:
In order to avoid the transmission signal was blocked by the moving body and
affect the signal quality, we suggest that customer try to put the product in a
higher place.
Содержание PKDIG
Страница 1: ......
