Sprint Protege 616, Руководство по установке и обслуживанию

Страница: 72 / 88

5-24
P
ROTEGÉ
® 616 I
NSTALLATION AND
M
AINTENANCE
M
ANUAL
, F
EBRUARY
2001
11.4.2 - Resource - User Names - To view or pro-
gram user names for active extensions on the 616
system, press the F3 softkey, "Show.”
Press the F3 softkey, "Chg,” and enter a valid
extension number. If no name has been entered, the
display will read "Empty.” Press the F3 softkey,
"Chg,” and use the dialpad to enter a seven-charac-
ter name.
• Press the " # " key to move the cursor one
space.
• Use the 0 key to enter the letters Q, Z, period
and the numeral 0.
• Press 0 once for Q, twice for Z, three times for a
period and four times for 0.
• The letters are entered as uppercase.
• Use the 1 key to enter a comma, dash, amper-
sand or the numeral 1.
• Press 1 once for comma, twice for dash, three
times for ampersand and four times for 1.
Default: The user name is empty.
F1 F2 F3
USER NAMES
back next show
Category 4 - Resource - User Names
Figure 5-59: User Names Screen
F1 F2 F3
EXT 10: EMPTY
back next chg
Figure 5-60: User Name Programming Screen
11.4.3 - Resource - Attendant - To designate the
extension number for the attendant, press the F3
softkey, "Chg,” and enter a valid extension number.
• Normally, all transferred calls that are unan-
swered when the Recall Timer expires recall to
the attendant.
• A system must have an extension designated
as an attendant.
• When the attendant is changed, the attendant
programming of Line, Receive and Ring
Assignment have to be programmed for the
new attendant.
• An attendant cannot be assigned to a single
line telephone.
Default: The attendant is extension 10.
F1 F2 F3
ATTENDANT: 10
back next chg
Category 4 - Resource - Attendant
Figure 5-61: Attendant Screen