Sprint Protege 616, Руководство по установке и обслуживанию

Страница: 67 / 88

5-19
P
ROTEGÉ
® 616 I
NSTALLATION AND
M
AINTENANCE
M
ANUAL
, F
EBRUARY
2001
11.3.9 - Call Handling - PBX Auto Pause
- To
shorten or extend the automatic pause that is
inserted after a PBX code is entered, press the F3
softkey, "Chg,” and then enter a time between 1 and
9 seconds.
Default:
The pause time is two seconds.
F1 F2 F3
PBX AUTO PAUSE: 2
back next chg
Category 3 - Call Handling - PBX Auto Pause
Figure 5-39: PBX Auto Pause Screen
11.3.10 - Call Handling - Tone Duration - This field
determines the length of the tones the 616 system is
sending to the central office. To change the time,
press F3 softkey, "Chg,” and enter the number of
milliseconds desired. The range of valid entries is 70
- 90 - 120 milliseconds.
Default: The tone signal is 70ms in length.
F1 F2 F3
TONE TIME: 70
back next chg
Category 3 - Call Handling - Tone Duration
Figure 5-40: Tone Duration Screen
11.3.11 - Call Handling - Voice Mail Dialing Ratio -
If a voice mail system is connected to the system,
two fields under Voice Mail Dialing Ratio need to be
programmed. To proceed with programming the
Tone Time and Interval Digit Time, press the F3 soft-
key, "Chg.”
F1 F2 F3
VM DIALING RATIO
back next show
Category 3 - Call Handling - Voice Mail Dialing Ratio
Figure 5-41: Voice Mail Dialing Ratio Screen