Spirax Sarco ELM Скачать руководство пользователя страница 46

Страница: 46 / 80

IM-P309-02

MI Issue 2

The customer password in the device when delivered is 0002.
A valid customer password allows all software parameter changes to be made that are

permissible for customers. After the operator switched the device off or did not touch any

keys for about 15 minutes, the authorization to change settings related to password entry will

automatically be canceled. If the operator does not enter a valid password, all settings can

be displayed but not changed. Parameter changes via HART may be carried out any time

without entering password.

15.2.2 Change customer password

After entering a valid customer password, you may change the existing password and enter

a new one. After selecting the Change customer password function and pressing enter, the

following will be display

Enter New password

0000

According to the description in Section 1.2.3.2 "value" the current value can be changed.
Press



to confirm and save the new password. Make sure that you entered the desired

password!

A copy of the password should be kept in a safe place.

Reactivation of a

transmitter at the vendor’s site due to a lost password is not part of our warranty!

15.2.3 Service password

You do not need the service password for setting the functions necessary for operation.
The service password is reserved for service technicians and not provided to customers.

Correct settings are essential for proper operation of the device (e.g. parameterization and

calibration values).

Содержание ELM

















































































Результаты поиска

Содержание ELM

Отзывы:

Spirax Sarco ELM, Инструкция по установке, эксплуатации и обслуживанию, Страница: 46 / 80

Результаты поиска

Содержание ELM

Отзывы: