Spirax Sarco ELM, Инструкция по установке, эксплуатации и обслуживанию, Страница: 39 / 80

IM-P309-02 MI Issue 2 39
14.1.3.1 Selection window / make a selection
In the selection window, the first line of the LCD always contains the heading, while the second
line displays the current setting. This setting is shown in square brackets if the system is in
Programming mode.
In Programming mode (see section 14 Operating modes), i.e. after a password has been
entered (see 14.1.3.3 Passwords and 15.2 PASSWORD functional class ), the operator can
navigate to the desired setting by using the

key or the key and the operator can then
confirm your selection by pressing  (ENTER key). To retain the current setting, press Esc.
14.1.3.2 Input window / modify a value
In the input window, the first line of the LCD always shows the heading, while the second
line shows the current setting.
Example:
These modifications can only be made in Programming mode (refer to 14 Operating modes),
which means that a correct password (see 14.1.3.3 Passwords and 15.2 PASSWORD functional
clas) must be entered. To move the cursor from one decimal place to the next, use the < or >
keys. To increase the value of the decimal place just under the cursor by "1," use the

key,
and use key to lower the number by 1. To change the minus and plus sign, place the cursor
in front of the first digit. To confirm and apply the change, press enter. To retain the current
value, press Esc.
14.1.3.3 Passwords
Programming mode is password protected. The customer password allows all changes to be
made that are permissible for customers. This password can be changed when the device is
first put into operation. Such changes should be kept in a safe place.
The ELM customer password in the device when delivered is 0002.
The service password allows for modification of all ELM functions. This password is not given
to customers.
For further information on customer passwords, see Section 15.2 PASSWORD functional class.
Function name
[Selection]
Function name
-4,567 Unit

