Z100080
ZX-
1 Operator’s Manual
Spinergy/SMP
Page 7
NOTE
Indicates a helpful condition or situation. A
note can make operating your ZX-1 more
enjoyable and typically provide helpful tips.
Failure to comply with a note will not result in
any equipment damage or injury to operator.
WARNING
•
Read and understand the product manual
before operating the ZX-1.
•
Use extreme caution and avoid sudden
stops or turns when traveling up or down
inclines.
•
Reduce speed when traversing down
inclines, traveling over obstacles or rough
terrain.
•
Do not attempt to stop a moving wheel-
chair using wheel locks.
•
Keep hands, fingers and any other body
parts clear of moving parts to avoid injury.
•
Always turn power OFF before transfer-
ring in/out of wheelchair.
•
Maximum safe incline is 6 degrees.
CAUTION
•
Fuse rating is 50 Amps. Do not replace
with a lower rated, higher rated or slow
blow fuse. (Fuse is located above batteries
attached to frame).
•
Maximum weight of user not to exceed
250 lbs.
•
Maximum curb height
2”
NOTE
•
Minimum distance on fully charged bat-
tery is 5 miles for Lead Batteries and 9
miles for Lithium Batteries based on the
max occupant weight rating of 250lbs.
•
Breaking distance is approximately 1 ft.
Disclaimer: Minimum distance can be
effected by occupant weight, terrain,
weather, tire inflation, tire type, as well as
several other specific factors.
PRODUCT INFORMATION
Product Name and Model: ZX-1 Power Add
On.
Common Name: Manual Wheelchair Power
Add On.
Rx Use Only: Federal law restricts this device
to sale by or on the order of a physician.
FLAMMABILITY/SELF EXTINGUISH-
ING PROPERTIES
All components contained in the ZX-1 pass the
self-extinguishing flame retardancy tested to
the Class 1 Flame Spread per ASTM E-84
specification.
