Z100080
ZX-
1 Operator’s Manual
Spinergy/SMP
Page 31
CAUTION
•
Avoid close proximity to other electrical
and alarm systems. Failure to comply can
cause damage to equipment in the event
the ZX-1 disturbs performance of electrical
devices or alarm systems.
EMI/RFI RECOMMENDATIONS
1.
Do not turn on or use hand-held personal
electronic communication devices such as
cellular phones, 2-way radios, and CB
radios while ZX-1 is powered on.
2.
Be aware of any nearby transmitters (radio,
television, microwave, etc.) on ZX-1 travel
route and avoid operating ZX-1 close to
any of those transmitters.
3.
Power-off ZX-1 if unit will be stationary
for an extended time period.
4.
Do not modify or add accessories or com-
ponents to ZX-1 making the ZX-1 more
susceptible to EMI/RFI.
During unintended movement or unintended
park brake release, power-off ZX-1 as soon as
it is safe.
·Report all unintended movement incidents
and unintended parking brake movements to
Spinergy.
WARNING
•
Power-off ZX-1 as soon as it is safe dur-
ing unintended or uncontrollable motion
occurs or if unintended park brake release
occurs. Failure to comply could result in
injury to operator.
•
Power off ZX-1 if operator anticipates
being seated for extended period of time.
This will prevent unexpected motion from
inadvertent joystick contact and also elimi-
nate unintended EMI movement possibili-
ties.
TRANSPORTING ZX-1
TRANSPORTATION
WARNING
•
Properly and securely stow ZX-1 during
transportation. Failure to comply could
cause injury to persons or damage to
equipment.
Avoid damage to cables during transportation
and connection process.
When transporting ZX-1 equipped wheelchair,
make certain control system is well protected.
LIFTS FOR ZX-1 AND WHEELCHAIRS
During travel, some ZX-1 operators may
choose to use a vehicle-equipped lift to
transport the ZX-1. Spinergy recommends
understanding lift
manufacturer’s
instructions
before operating the lift with ZX-1 attached.
