Z100080
ZX-
1 Operator’s Manual
Spinergy/SMP
Page 37
WARNINGS
•
Batteries are heavy (see Specifications
table). If unable to lift that much weight, be
sure to get help. Use proper lifting tech-
niques and avoid lifting beyond your
capacity.
•
Do not mix old and new batteries.
Always replace both batteries at the same
time.
•
For safety reasons, only sealed AGM
non-spillable batteries that meet DOT CFR
173.159 (d), IATA Packing Instructions
806, and IATA Provision A67 shall be
installed in the ZX-1.
TO REPLACE BATTERIES:
1.
Turn off power to controller.
2.
Remove carbon fiber cover.
3.
Unplug battery harnesses from both batter-
ies (can be difficult).
4.
Remove strap that secures batteries to
frame compartment.
5.
Remove both batteries from frame com-
partment.
6.
Place new batteries in frame compartment.
(use only sealed AGM non-spillable batter-
ies that meet DOT CFR 173.159 (d), IATA
Packing Instructions 806, and IATA Provi-
sion A67).
7.
Fasten strap tightly around both batteries
ensuring batteries stay properly seated in
frame compartment.
BATTERY RECYCLING (DIRECTIVE
91/157/EEC)
Return used batteries to authorized battery
recycling center for disposal in accordance
with Battery Directive 91/157/EEC.
WARNINGS:
•
Make sure to tighten strap so batteries are
secure.
•
Connect battery harnesses to both batter-
ies. Match red cable to red battery tab
and black cable to black tab.
•
Reinstall carbon fiber cover.
•
Charge batteries before use. See
“Battery
Charging”
on page 33.
