S P I K E N A N O U S E R G U I D E
25
Brew Day –
Sparging
Figure 5
PRO TIP:
Once the wort in the BK covers the
elements they can be turned on. (see next step)
1.
Move the long hose (
Red
) from the top of the HLT
to the top of the MT. (see
Figure 5
)
2.
Move the other long hose (
Green
) from the top of
the MT to the top port on the BK. (see
Figure 5
) The
green hose will stay in this position for the Whirlpool
later.
3.
Remove the vorlauf arm and install the sparge arm.
(see
Figure 5
)
4.
Open both the water and wort pump outlet ball
valves about ¼ of the way.
5.
Turn on the water pump and wort pump.
6.
Adjust the valve on the wort pump so a slow trickle of
water is flowing into the BK.
7.
The flow into the MT and into the BK should match.
8.
Sparge the desired amount and fill the BK until you
reach your pre-boil target volume.
