S P I K E N A N O U S E R G U I D E
10
Assembly –
Steam
Condenser Lid
NOTE:
Water from drain hose will be warm. This can be
collected and used for cleaning or reused for
recirculation which cuts down on water usage. The
water can be recirculated until it’s about 120F or
until it becomes too hot to touch. Starting with ice
in the drain bucket can increase the amount of
time the recirculation water can be used for until it
gets too hot.
NOTE:
Make sure you keep the drain hose above the water
line if using a bucket for drainage. Failure to do so
will cause back pressure and system issues.
The Steam Condenser Lid is placed on the Boil Kettle
during the boiling step. Follow the process portion of
this guide for specific operating instructions.
