Spike Systems PBG Series, Системное руководство

Страница: 38 / 94

Spike Systems: PBG System Family Installation
30
When the hoses have been extended through the track to the Non-­‐Control Cabinet, carefully
route the hoses to the location of the Hydraulic Cylinder on the Non-­‐Control Cabinet ensuring
that there are no kinks or sharp bends in the hydraulic hoses.
Attach the hydraulic hoses to the Hydraulic Cylinder in two locations in the Non-­‐Control Cabinet.
The Control Cabinet hoses are already attached.
NOTE – Both hydraulic hoses are color coded to correspond to color codes on the hydraulic
cylinder. Ensure that the RED coded hose is attached to the RED coded location on the hydraulic
cylinder in the Non-­‐Control Cabinet. In a similar fashion, ensure that the GREEN coded hose is
attached to the GREEN coded location on the hydraulic cylinder in the Non-­‐Control Cabinet.
NOTE: The RED hose is attached to the TOP of the Hydraulic Cylinder, and the GREEN hose is
attached to the BOTTOM, corresponding to the color code markings on both the hoses and the
Cylinder.
When the system is fully installed and is operated for the first time, if the motor engages but the
plate does not move, ensure that the hoses are correctly installed. If the hoses are reversed, the
system will try to close an already closed gate
.
Figure 30 – Minor Positional Adjustments