Spektrum NX6 Скачать руководство пользователя

Страница: 48 / 53

SPEKTRUM NX6 • TRANSMITTER INSTRUCTION MANUAL

MODE CONVERSION

Centering screw

Programming Conversion:

1. Change the mode within the System Setup -> System Settings.
2. Calibrate the sticks within the System Settings menu.

Mechanical Conversion:

Mechanical conversion is required to change between Modes 1

and 2 or between Modes 3 and 4. The mechanical conversion

consists of the following steps:

1. Change the Throttle Ratchet/throttle tension; Remove the tension

on the side the was throttle, and apply the tension on the side that

will be throttle.

2. Adjust the Elevator Centering Screw When changing between

Modes 1 and 2, or between Modes 3 and 4, you must adjust

the elevator centering screw.

1. Hold the Elevator or Throttle stick in the full up or full down

position when you are adjusting the elevator centering

screw. Holding the gimbal stick reduces the load on the

elevator centering mechanism and makes it easier to

adjust the centering screw.

2. Use a Phillips screwdriver to adjust the elevator centering

screw. Tightening the screw will engage the centering spring.

IMPORTANT:

Do not remove the Mode change screws too far or you will

have to open the case to put it back together.

You can select transmitter modes 1, 2, 3 or 4 for the NX6. Converting

the mode requires both a programming and a mechanical change.

Antenna Position

We recommend setting up your antenna to be positioned vertical

when you are in your most comfortable position for flying. The

antenna may also be folded for storage.

Ratcheted Throttle – Smooth Throttle Adjustment

Ratchet:

1. Locate the throttle strap adjustment screws on both gimbals.

The ratchet set screw engages a serrated section on the

gimbal for a ratcheted throttle, while the tension set screw

engages a strap for smooth tension on the gimbal.

2. To engage the throttle ratchet turn the ratchet set screw

clockwise until the ratchet engages.

3. To disengage the throttle ratchet turn the screw counter

clockwise until the gimbal moves freely.

Smooth Tension:

1. To engage the throttle tension, turn the tension set screw

clockwise until the Tension engages.

2. To disengage the throttle Tension turn the screw counter

clockwise until the gimbal moves freely.

Tension

Ratchet

Содержание NX6






















































Результаты поиска

Содержание NX6

Отзывы:

Похожие инструкции для NX6

Бренды по названию

Популярные бренды

Spektrum NX6, Инструкция по эксплуатации

Результаты поиска

Содержание NX6

Отзывы:

Похожие инструкции для NX6

Бренды по названию

Популярные бренды