Spektrum NX6 Скачать руководство пользователя

Страница: 31 / 53

SPEKTRUM NX6 • TRANSMITTER INSTRUCTION MANUAL

Travel Adjust sets the overall travel or endpoints of the servo arm

movement.

To adjust travel values:

1. Scroll to the channel you wish to adjust and press the scroll

wheel. When adjusting travel values assigned to a control stick:

a. Center the control stick to adjust both directions at the

same time.

b. To adjust travel in one direction only, move the control

stick in the direction you wish to adjust. Continue hold-

ing the control stick in the desired direction while you

are adjusting the travel value.

2. Scroll left or right to adjust the travel value. Press the scroll

wheel to save the selection.

IMPORTANT

: ALT, ROL, PIT and YAW replaces THR, AIL, ELE and

RUD channels in multirotor to more closely reflect the flight axis

in the multirotor aircraft. This change is throughout the multirotor

menu options.

Sub-Trim adjusts the servo travel center point.

NOTICE:

Use only small sub-trim values or you may cause

damage to the servo.

Use the Reverse menu to reverse the channel direction. For

example, if the elevator servo moves up and it should move down.

To reverse a channel direction:

1. Scroll to Travel and press the scroll wheel. Scroll left until

Reverse appears and press the scroll wheel again to save the

selection.

2. Scroll to the channel you wish to reverse and press the scroll

wheel.

If you reverse the Throttle channel, a confirmation screen

appears. Select YES to reverse the channel. A second screen

appears, reminding you to bind your transmitter and receiver.

CAUTION:

Always rebind the transmitter and receiver

after reversing the Throttle channel. Failure to do so will

result in the throttle moving to full throttle if failsafe activates.

Always perform a control test after making adjustments to confirm

the model responds properly.

CAUTION:

After adjusting servos, always rebind the

transmitter and receiver to set the failsafe position.

Travel Adjust

Sub-Trim

Reverse

Press

FUNCTION LIST

The Servo Setup menu contains the following functions:

Once you have selected the model number you want to use and have defined the aircraft type, wing and tail type and other details in the

System Setup menu, use the Function list to define the details specific to your model’s setup such as servo travel, reversing, mixing, etc.

The Main Screen appears when you power on the transmitter. Press the scroll wheel once to display the Function List.

• Travel Adjust

• Sub-Trim

• Reverse

Servo Setup

Содержание NX6






















































Результаты поиска

Содержание NX6

Отзывы:

Похожие инструкции для NX6

Бренды по названию

Популярные бренды

Spektrum NX6, Инструкция по эксплуатации

Результаты поиска

Содержание NX6

Отзывы:

Похожие инструкции для NX6

Бренды по названию

Популярные бренды