Spektrum NX6 Скачать руководство пользователя

Страница: 36 / 53

SPEKTRUM NX6 • TRANSMITTER INSTRUCTION MANUAL

FUNCTION LIST

Switch Changes:

Use the switch change report to call out what your switch positions

are. With this menu you can assign audio reports for events such

as changing modes or rates, retract position, flap position, etc.

Stepping Reports:

Stepping reports let you select from a list of reports to announce

at each flip of a switch. Stepping reports move to the next report at

every flip of the switch.

Generic Reports:

Select Report At Power-Up and check off your desired switches to

get a switch position report of those switches when you power ON

the transmitter.

Center Tone:

This menu gives you the ability to add a tone at the center of each

stick travel.

Flight Modes:

Choose your audio reports to go with each flight mode in this menu.

Telemetry Warnings:

Shortcut to the Telemetry Warnings screen.

Trainer State:

This menu give you options to select who has control when a

trainer/instructor setup is in use.

Model Start:

This menu gives you options for tones and voice for when your

model starts operation, based on throttle or a switch of your choice.

System Sounds:

Gives you control over the inactivity alarm and the low voltage alarm

Binding:

Gives you control over the audio events during the bind process.

For compatible video transmitters, this menu can select the options

directly from your NX6. Set the power level and frequency of your

video transmitter, and select SEND to make the change.

If you Bind a Forward Programming capable receiver to your

NX6, a Forward Programming menu will appear in the Function

List automatically. Think of the Forward Programming menu as

a programming interface for your connected receiver. The menu

structure, options and any changes made are done directly on

the receiver, the transmitter is only an interface. Each device may

have different menu structure and operate in a different manner

than the next Forward Programming device. The receiver must

be powered on and connected to be able to enter the forward

programming menu.

For compatible video transmitters, this menu can select the options

directly from your NX6. Set the Power level and frequency of your

video transmitter, and select Send to make the change.

VTX Setup

Forward Programming

Audio Events

Содержание NX6






















































Результаты поиска

Содержание NX6

Отзывы:

Похожие инструкции для NX6

Бренды по названию

Популярные бренды

Spektrum NX6, Инструкция по эксплуатации

Результаты поиска

Содержание NX6

Отзывы:

Похожие инструкции для NX6

Бренды по названию

Популярные бренды