Speeflo 449-500 Скачать руководство пользователя страница 9

Страница: 9 / 32

Set Up

Read, understand, and follow all warnings before starting
or operating this sprayer.

Required tools: Crescent Wrench

1. One Gun Operation - Attach the gun and hose. Always use a

spray hose at least 50 feet long. Do not use

PTFE

or thread

sealant on this assembly. Do not install the spray tip at this
time.

2. Two Gun Operation - Remove the plug from the second

gun outlet. Connect a hose and a gun to the outlet.

3. Multiple Gun Operation - The PowrTwin 5500DI is

engineered to handle up to 3 guns with .023" tips. When
using more than two guns, make sure the second gun
hookup outlet is plugged. Connect the multiple gun
manifold to the single gun outlet. These manifolds are for
either 2, 3, or 4-guns and have shut off valves. Connect a
hose and gun to each outlet.

4. Fill the wet-cup 1/2 full with Speeflo's Piston Lube (P/N

700-925) supplied by the factory. This extends packing life.

5. Electric Models - Use a 20 amp service outlet. Always

locate the AC electric model within 10 to 15 feet of the
service outlet. Use a short electric cable and a long paint
hose. Any extension cord will create some voltage drop.
For both AC and DC models, if an extension cord is
necessary, use only grounded 3 wire # 12 wire.
If the unit is being operated in an area that is overloaded
by other appliances or low voltage conditions, it is
important to start the unit "unloaded." Tip the electric motor
forward so that the belt is loosened and the motor starts
without full load. This reduces the amperage draw on
starting and may avoid kicking out the circuit breaker.

6. Be sure the PowrTwin system is grounded. All Speeflo

units are equipped with a grounding lug. A grounding cable
(not supplied) should be used to connect the unit to a true
earth ground. Check your local electrical regulations for
detailed grounding instructions. See the Accessories and
Service Kits section near the back of this manual for
ordering information.

8. Strain all paints with Speeflo 5 gallon Nylon Strainer (P/N

160-524) or Speeflo 1 gallon Nylon Strainer (P/N 160-124)
to assure trouble free operation and freedom from frequent
cleaning of inlet screen and gun strainer.

Proper grounding is important. This applies to both gas
and electric powered models. The passage of some
materials through the nylon fluid hose will build up a static
electric charge, which if discharged, could ignite solvent
vapors present and create an explosion.

Fueling

Gasoline is extremely flammable and is explosive under
certain conditions.

• ALWAYS turn the engine off before refueling.
• Refuel in a well-ventilated area.
• Do not smoke or allow flames or sparks in the refueling

area or where gasoline is stored.

• Do not overfill the fuel tank. After refueling, make sure the

tank cap is closed properly and securely.

• Be careful not to spill fuel when refueling. Spilled fuel or

fuel vapor may ignite. If any fuel is spilled, make sure the
area is dry before starting the engine.

• Avoid repeated or prolonged contact with skin or breathing

of vapor.

• Keep out of the reach of children.

Specifications

• Use automotive gasoline that has a pump octane number

of 86 or higher, or that has a research octane number of 91
or higher.

• Unleaded fuel produces fewer engine and spark plug

deposits and extends the life of exhaust system
components.

• Never use stale or contaminated gasoline or an oil/gasoline

mixture. Avoid getting dirt, dust or water in the fuel tank.
Use of a lower octane gasoline can cause persistent
"pinging" or heavy "spark knock" (a metallic rapping noise)
which, if severe, can lead to engine damage.

Gasolines Containing Alcohol

If you decide to use a gasoline containing alcohol (gasohol), be
sure its octane rating is at least as high as that recommended
by the engine manufacturer. There are two types of "gasohol":
one containing ethanol, and the other containing methanol. Do
not use gasohol that contains more than 10% ethanol. Do not
use gasoline containing methanol (methyl or wood alcohol) that
does not also contain co-solvents and corrosion inhibitors for
methanol. Never use gasoline containing more than 5%
methanol, even if it has co-solvents and corrosion inhibitors.

NOTE: Fuel system damage or engine performance

problems resulting from the use of fuels that
contain alcohol is not covered under the
warranty. The engine manufacturer cannot
endorse the use of fuels containing methanol
since evidence of their suitability is incomplete at
this time.
Before buying gasoline from an unfamiliar station,
try to find out if the gasoline contains alcohol. If
it does, confirm the type and percentage of
alcohol used. If you notice any undesirable
operating characteristics while using a gasoline
that contains alcohol, or one that you think
contains alcohol, switch to a gasoline that you
know does not contain alcohol.

NOTE: If "spark knock" or "pinging" occurs at a steady

engine speed under normal load, change brands
of gasoline. If spark knock or pinging persists,
consult your authorized Honda dealer. Failure to
do so is considered misuse, and damage
caused by misuse is not covered by Honda's
Limited Warranty.
Occasionally you may experience light spark
knock while operating under heavy loads. This
is no cause for concern, it simply means your
engine is operating efficiently.

WARNING